|
BPX2200.1
2200
Watt Parallel/Bridge Subwoofer Amplifier
• Slope-selectable
variable electronic crossovers - Both the BPX1100.1 and
BPX2200.1 is equipped with a variable electronic
crossover capable of setting the slope rate at 12dB or
24dB per octave. The crossover adjustment range is 32Hz
- 320Hz.
• Unlike
conventional mono subwoofer amplifiers that only deliver
their maximum power into a single impedance, the
BPX1100.1 and BPX2200.1 are two-channel amplifiers that
can be bridged to deliver double the voltage of a single
channel into impedances between 2 and 4 ohms. The two
channels can also be connected in parallel - that''s
right, parallel - to provide double the current of
single channel into impedance below 2 ohms. This feature
is patented and unprecidented in car audio
amplification. Thanks Crown!
• Dynamic
Bass Optimization (DBO) - This provides variable
filtering with adjustable "Q" below 100Hz, far
beyond conventional "Bass Q" circuits, by
allowing the low-frequency output to be optimized for
specific subwoofer applications. Frequencies below an
enclosure''s tunign frequency can be attenuated,
preventing damage to the subwoofer and allowing the
amplifier's power to be better utilized.
• High
Effective Damping Factor - Both the BPX1100.1 and
BPX2200.1 have a high Effective Damping Factor. The
result is better subwoofer control and lower distortion.
• Full-range
preamp outputs - In the event that multiple amplifiers
are used in an application, this feature allows for
streamlined system hookup. No high-loss Y-adapters or
splitteres needed.
• Both
the BPX1100.1 and BPX2200.1 come equipped with a remote
bass level control allowing you to optimize bass output
for specific music or preferences from the driver's
position.
• 2200W
x 1 into 2 Ohms
• 2200W
x 1 into 4 ohms, series-bridged
• 2200W
x 1 into 1 ohm, parallel-bridged
|
