10 Time World Champion 

World Champion  Installs 

504-833-2824


    


You've heard the rumors - a monster SPL sub from KICKER - an 18-inch square-coned giant - a sub so big it takes two guys to even look at it, let alone carry it - power ratings of 5000 watts RMS and 10,000 watts peak - a field-replaceable cone/coil assembly- It's all true AND MORE!

The outrageous KICKER SoloX S18X is the biggest thing yet from the biggest name in bass. Eighteen inches and 100 pounds of the scariest, hairiest subwoofer to ever pound the face of the earth - engineered to deliver mind-numbing, gut-busting low frequency mayhem that only the seriously warped have the nerve to even imagine. The SoloX is for the hard-core SPL competitor (or guys that behave that way), and sometimes these folks blow things up. That's why we designed it with a removable cone/coil assembly. If you happen to really freak and let out the magic smoke, you can easily swap things out in minutes without pulling the entire sub!

How does it perform? It grabbed World Championships in its first SPL competition (that means it's loud) - AND in its first Sound Quality competition (that means it sounds good). How's that?
SLAM (SPAIR Lockdown Attachment Mechanism)™ - aluminum frame which locks down the removable assembly.

SPAIR (Simple Pull Apart Insertable Replacement)™ (pat.pend.) - a stamped steel basket holding the removable cone/voicecoil assembly.
  • Titanium Deposit Impregnated Cone with rolled outer edge, ISD, stitched surround
  • S4 Quad Spider Array™
  • Dual Ultra-Length 3.5-inch Voice Coil
  • B3-Link 3-Way Connection System™ allows binding post, terminal block, or barrier strip connection
  • Strain relief boots on tinsel lead wires
BAM (Basket and Motor assembly)™ - the heavy part.
  • Cast Aluminum Basket
  • UniPlate V.2™ extended pole/backplate assembly
  • X-Vent™ Extended Pole (pat.pend.) for cool operation
  • ARCTIC (Aluminum Rapid Cooling Thermal Induction Centering) Cap™ centers SPAIR and aids cooling by adding mass and channeling air into X-Vent
  • Triple Stack Custom Tooled Magnet
  • Chrome Plated Backplate
  • Thick Rubber Magnet Boot protects against damage during installation
Also included is the SPLAT (Speaker Precise Location Alignment Tool) to locate and anchor the BAM to the baffle of your box.




Model S18X
Size (IN., CM) 18, 45.7
Impedance (OHMS) 1 DVC, 2 DVC
Max Rec Amplifier Power (WATTS PEAK) 10000
Max Rec Amplifier Power (WATTS RMS) 5000
Sensitivity (dB 1W/1M) 89.7
Frequency Response (HZ) 18-100
Mounting Depth (IN., CM) 11-3/8, 28.9
Mounting Cutout, Square (IN., CM) 16-11/16, 42.4
Recommended Box Volumes The SoloX is engineered for highly
specialized installations/applications.
See the Tech Manual or consult
the KICKER Technical Support Team
for enclosure specifications based
on your individual requirements.


   


Nobody gives you the tremendous output advantage of square subs but KICKER, and now the all-new L5 Solo-Baric doubles your options. Built around a rugged steel frame, the L5 is slammed with performance features borrowed from its big brother L7 - extra-length dual voice coils, huge motor structure, heavy-duty large bore terminals, sealed or vented box capability, and, of course, KICKER's patented square subwoofer technology. Power handling? The Solo-Baric L5 loves mondo power that would rip lesser drivers to shreds.




Have it your way! Snag one of our raw cast aluminum speaker guards and go for it. Unfinished and ready for you to paint to match whatever you want - there are sizes to fit KICKER subs, round or square, from 8 to 15 inches. You can even use 'em to class up your brand x install until you get the real thing. We won't tell. Speaker guards are also available already finished with a super-tough black textured paint.

(more)

Model S15L5 S12L5 S10L5 S8L5
Size (IN., CM) 15, 38.1 12, 30.5 10, 25.4 8, 20.32
Impedance (OHMS) 2 DVC, 4 DVC 2 DVC, 4 DVC 2 DVC, 4 DVC 2 DVC, 4 DVC
Max Rec Amplifier Power (WATTS PEAK) 1500 1200 900 600
Max Rec Amplifier Power (WATTS RMS) 750 600 450 300
Sensitivity (dB 1W/1M) 91.3 87.1 86 83.9
Frequency Response (HZ) 18-100 20-100 24-100 28-100
Mounting Depth (IN., CM) 7-7/8, 20 6-3/8, 16.1 5-11/16, 14.5 4-7/8, 12.4
Mounting Cutout, Square (IN., CM) 13-3/4, 34.9 11, 27.9 9-1/4, 23.5 7-1/4, 18.4
Min Rec Sealed Box Vol (CU. FT., LITERS) 1.5, 42.5 .88, 24.9 .66, 18.7 .33, 9.4
Max Rec Sealed Box Vol (CU. FT., LITERS) 6.0, 169.9 2.0, 56.6 1.0, 28.3 .75, 21.2
Min Rec Vented Box Vol* (CU. FT., LITERS) 3.0, 85.0 1.75, 49.6 1.25, 35.4 .66, 18.6
Max Rec Vented Box Vol* (CU. FT., LITERS) 6.0, 169.9 3.25, 92.1 2.25, 63.8 1.0, 28.3


 

New for 2003! We dare you. Dollar-for-dollar, inch-for-inch -find another sub like the KICKER Comp. It ain’t gonna happen, bub. The Comp is entry-level, all right - if you’re ready for entry into the brutal world of genuine KICKER bass! But what did you expect? Every Comp is loaded with the design/performance features that separate KICKER subs from the wannabes. Like the CompVR, the Comp kicks hard in sealed or vented boxes - it even rocks without a box, if you’re really short on space. The new KICKER Comp comes in four sizes - from 8- to 15-inch - with 4- or 8-Ohm single voice coils. Optional cast aluminum grills are available in textured black paint or raw for custom finishing. And how's this for easy? You can get ten- and twelve-inch models in ready-to-install boxes, complete with grills. The TC10 is a slim-profile sealed truck box, the HC12 a sealed hatch box. High-output vented boxes with 10- or 12-inch subs are the VC12 and VC10. The rugged enclosures are covered in a durable gray carpet.





Have it your way! Snag one of our raw cast aluminum speaker guards and go for it. Unfinished and ready for you to paint to match whatever you want - there are sizes to fit KICKER subs, round or square, from 8 to 15 inches. You can even use 'em to class up your brand x install until you get the real thing. We won't tell. Speaker guards are also available already finished with a super-tough black textured paint.

(more)

Model C15 C12 C10 C8
Size (IN., CM) 15, 38.1 12, 30.5 10, 25.4 8, 20.32
Impedance (OHMS) 4,8 4,8 4,8 4,8
Maximum Amplifier Power (WATTS PEAK) 500 300 250 200
Maximum Amplifier Power (WATTS RMS) 250 150 125 100
Sensitivity (dB 1W/1M) 89.2 88.6 87.7 84.5
Frequency Response (HZ) 25-500 27-500 30-500 30-500
Mounting Depth (IN., CM) 7-1/8, 18.1 5-1/2, 14.0 4-9/16, 11.6 3-13/16, 9.6
Mounting Hole Diameter (IN., CM) 13-11/16, 34.8 10-15/16, 27.7 9-5/32, 23.3 7-1/8, 18.1
Min Rec Sealed Box Vol (CU. FT., LITERS) 2.25, 63.7 1.25, 35.4 1.0, 28.3 0.5, 14.2
Max Rec Sealed Box Vol (CU. FT., LITERS) 5.0, 141.5 3.5, 99.1 2.4, 67.9 1.2, 34.0
Min Rec Vented Box Vol (CU. FT., LITERS) 3.0, 84.9 1.75, 49.6 1.25, 35.4 0.8, 22.6
Max Rec Vented Box Vol (CU. FT., LITERS) 4.0, 113.2 2.25, 63.8 1.75, 49.6 1.2, 34.0


 

New for 2003! The totally-new CompVR is KICKER’s most powerful round sub - and that means things are gonna get loud. What kind of bass turns you on? Pounding and bigger-than-life? - you’ll want yours in a vented box. Tight and solid? - it’s a sealed box for you. It’s your choice - the CompVR is ready to stand and deliver huge low end that revs up the excitement wherever there’s bass to be played. If you’re totally whack, the 18-inch CVR18 is a foot-and-a-half of one megawatt madness. In five different sizes with 2- or 4-Ohm dual voice coil options, there’s a KICKER CompVR for everyone - everyone that can stand the pressure, that is.
Optional cast aluminum grills are available in textured black paint or raw for custom finishing.
To really make life easy, you can get ten- and twelve-inch models in ready-to-install boxes, complete with grills. The TCVR10 is a slim-profile sealed truck box. Sealed hatch box is the HCVR12. High-output vented boxes with 10- or 12-inch subs are the VCVR12 and VCVR10. The rugged enclosures are covered in a durable gray carpet.




Have it your way! Snag one of our raw cast aluminum speaker guards and go for it. Unfinished and ready for you to paint to match whatever you want - there are sizes to fit KICKER subs, round or square, from 8 to 15 inches. You can even use 'em to class up your brand x install until you get the real thing. We won't tell. Speaker guards are also available already finished with a super-tough black textured paint.

(more)

Model CVR18 CVR15 CVR12 CVR10 CVR8
Size (IN., CM) 18, 45.7 15, 38.1 12, 30.5 10, 25.4 8, 20.32
Impedance (OHMS) 2DVC, 4DVC 2DVC, 4DVC 2DVC, 4DVC 2DVC, 4DVC 2DVC, 4DVC
Max Rec Amplifier Power (WATTS PEAK) 2000 1000 800 600 400
Maximum Amplifier Power (WATTS RMS) 1000 500 400 300 200
Sensitivity (dB 1W/1M) 89.18 88.5 86.4 85.2 83.0
Frequency Response (HZ) 23-500 25-500 25-500 25-500 30-500
Mounting Depth (IN., CM) 8-1/4, 20.9 7-1/2, 19.1 6, 15.3 5-7/16, 13.8 3-15/16, 10.0
Mounting Hole Diameter (IN., CM) 16-5/16, 41.1 13-3/4, 34.9 10-15/16, 27.8 9-5/32, 23.3 7, 17.8
Min Rec Sealed Box Vol (CU. FT., LITERS) 2.2, 62.2 1.8, 50.9 1.0, 28.3 0.8, 22.6 0.4, 11.3
Max Rec Sealed Box Vol (CU. FT., LITERS) 5.4, 152.8 5.2, 147.2 4.6, 130.3 3.0, 85.0 1.8, 50.9
Min Rec Vented Box Vol* (CU. FT., LITERS) 4.0, 113.2 3.0, 84.9 1.75, 49.6 1.25, 35.4 0.8, 22.6
Max Rec Vented Box Vol* (CU. FT., LITERS) 6.0, 169.8 5.0, 141.6 2.25, 63.8 1.75, 49.6 1.2, 34


 


How do you improve the drivers that totally reshaped how the world looks at subwoofer performance? Turn loose KICKER's sick sub scientists and say "WE WANT LOUDER!" What you'll get is a sub with longer throw, lower distortion, and impossible power handling for greater gut-pounding power potential than any KICKER sub - ever. From the glowing titanium on the ultra-rigid cone to the sturdy cast aluminum basket, every detail points to one purpose - over-the-top bass beyond your wildest dreams. When you're ready to test the limits of low and loud, you're ready for the Solo-Baric L7.




Have it your way! Snag one of our raw cast aluminum speaker guards and go for it. Unfinished and ready for you to paint to match whatever you want - there are sizes to fit KICKER subs, round or square, from 8 to 15 inches. You can even use 'em to class up your brand x install until you get the real thing. We won't tell. Speaker guards are also available already finished with a super-tough black textured paint.

(more)

Model S15L7 S12L7 S10L7 S8L7
Size (IN., CM) 15, 38.1 12, 30.5 10, 25.4 8, 20.32
Impedance (OHMS) 2 DVC, 4 DVC 2 DVC, 4 DVC 2 DVC, 4 DVC 2 DVC, 4 DVC
Max Rec Amplifier Power (WATTS PEAK) 2000 1500 1200 900
Max Rec Amplifier Power (WATTS RMS) 1000 750 600 450
Sensitivity (dB 1W/1M) 89.3 86.9 85.4 84.9
Frequency Response (HZ) 18-100 20-100 24-100 28-100
Mounting Depth (IN., CM) 8-3/16, 20.8 6-13/16, 17.3 6-3/8, 16.2 4-11/16, 11.9
Mounting Cutout, Square (IN., CM) 14-1/16, 35.7 11-3/16, 28.4 9-1/2, 24.1 7-5/8, 19.3
Min Rec Sealed Box Vol (CU. FT., LITERS) 1.5, 42.5 .88, 24.9 .66, 18.7 .33, 9.4
Max Rec Sealed Box Vol (CU. FT., LITERS) 6.0, 169.9 2.0, 56.6 1.0, 28.3 .75, 21.2
Min Rec Vented Box Vol* (CU. FT., LITERS) 3.0, 85.0 1.75, 49.6 1.25, 35.4 .66, 18.6
Max Rec Vented Box Vol* (CU. FT., LITERS) 6.0, 169.9 3.25, 92.1 2.25, 63.8 1.0, 28.3


 

Whether you're on the way to the beach or out on the water, KICKER is here to help you make some serious waves.

Leaving shore is no reason to stop Livin' Loud thanks to the new KICKER KM10 Marine sub. We took a genuine KICKER subwoofer, then treated it with special water resistant features so it'll stand up to the conditions. Special water resistant grills are also available for even more protection. Pop a couple of these ten-inchers into your boat and get ready to blow everybody else out of the water. What else can we say except "Damn the torpedoes and full speed ahead"?
Model KM10
Size (IN., CM) 10, 25.4
Impedance (OHMS) 4
Maximum Amplifier Power (WATTS PEAK) 250
Maximum Amplifier Power (WATTS RMS) 125
Sensitivity (dB 1W/1M) 89
Frequency Response (HZ) 30-1000
Mounting Depth (IN., CM) 4-1/2, 11.4
Mounting Hole Diameter (IN., CM) 9-3/16, 23.3
Min Rec Sealed Box Vol (CU. FT., LITERS) 1.0, 28.3
Max Rec Sealed Box Vol (CU. FT., LITERS) 1.5, 42.5


 


KICKER CompVR and Comp subwoofers are also available ready to rock in tough-looking, tough-performing boxes. Choose from sealed truck, sealed hatch and vented, all covered in rugged carpet and complete with protective grills.

KICKER CompVR Subwoofer Enclosures
Model TCVR10 HCVR12 VCVR10 VCVR12
Type Sealed Sealed Vented Vented
Woofer CVR10 CVR12 CVR10 CVR12
Impedance 2, 4 2, 4 4 4
Dim A (IN., CM) 4-1/2, 11.4 10-13/16, 27.5 8-5/16, 21.1 10-3/4, 27.3
Dim B (IN., CM) 7-3/4, 19.7 14, 35.6 11-1/4, 28.6 14, 35.6
Dim C (IN., CM) 15, 38.1 15, 38.1 13-1/2, 34.3 15, 38.1
Dim D (IN., CM) 22, 55.9 17-3/16, 43.7 30, 76.2 30, 76.2


 

 

 




You need your music real. Not "yeah-that-kinda-sounds-close" real, but "in-your-face sounds-like-you're-in-the-pit" real. That's Resolution - the high-powered high-performance drivers from KICKER.


If a three-way is good, then a four-way is even better – putting an ultra-thin Resolution Midbass between your sub and midrange creates the tightest bottom end you can imagine. Shallow enough to fit in a door (the 8-inch RMB8 is a mere 2-1/4 inches thick), tough enough to hammer you senseless – with sound and style to bring the bump up front where it belongs. If you’re short on space, they even go low enough to use as freeair subwoofers. An 8-inch sub in the door - that’s really Livin’ Loud!


Model RMB6 RMB8
Diameter(IN., CM) 6-1/2, 16.6 8, 20.32
Impedance (OHMS) 4 4
Maximum Amplifier Power (WATTS PEAK) 250 350
Maximum Amplifier Power (WATTS RMS) 125 175
Sensitivity (dB 1W/1M) 88 89
Frequency Response (Hz) 30-500 30-500
Mounting Cutout (IN., CM) 5-5/8, 14.3 7-1/4, 18.4
Mounting Depth (IN., CM) 2, 5.1 2-1/4, 5.8
Grills Yes Yes


 


Pick one up. Feel the heft of the rock-solid cast aluminum baskets. Check out the butyl rubber surrounds on the titanium-coated cones. You can tell this is a mid that can take punishing amounts of power without bailing – perfect for keeping up with your KICKER subs. That’s important because the midrange makes the music, and puny poser mids can trash your tunes.


Model R6c R5c R4c R3c
Diameter(IN., CM) 6-1/4, 15.9 5-3/4, 14.6 4-1/4, 10.8 3-1/2, 8.9
Impedance (OHMS) 4 4 4 4
Maximum Amplifier Power (WATTS PEAK) 200 180 140 100
Maximum Amplifier Power (WATTS RMS) 100 90 70 50
Sensitivity (dB 1W/1M) 87 87 87 86.5
Frequency Response (Hz) 40-4.5k 50-5k 75-6k 125-15k
Mounting Diameter (IN., CM) 5-1/4, 13.4 4-3/4, 12.1 3-3/4, 9.6 3-3/16, 8.1
Mounting Depth (IN., CM) 2-1/2, 6.4 2-3/8, 6.2 1-15/16, 5.0 1-5/8, 4.2